Watch Freeks banner

Cleaning Cases and Bracelets

2490 Views 14 Replies 12 Participants Last post by  TimeBomb
Hi All

I am looking for some sage advice on cleaning watch cases and bracelets.
Over the years I have collected a number of watches, some very cheap quartz pieces and other slightly more expensive purchases such as a few 50’s Seamaster’s and my work horse, the Tissot V8.

Unfortunately, due to my job and hobbies a couple of them are starting to look a bit grubby with grime between the links, around the crystal and a few scratches to the case and bracelet.

I am pretty hands on and would really like to have a go at cleaning them up myself. However, before diving in and ruining my watches in an attempt to clean them up, I wanted to do my research.

Could anyone tell me what are the best, most appropriate methods /materials to use when cleaning watch cases and bracelets particularly those made of stainless steel and how would you approach the different finishes, for example a brushed finish.

Any advice will be greatly appreciated:smile:

Many Thanks
1 - 2 of 15 Posts
I've been using an ultrasonic cleaner for watch bands or rather bracelets. It works great! After 2 or 3 minutes it sparkles. You can get one from Home Depot or Amazon dot com. I have the SPT UC0609 which cost me about $35.

Link:
http://t.homedepot.com/p/SPT-Ultrasonic-Cleaner-UC-0609/202498189?cm_mmc=Shopping%7cBase&gclid=CPqS09ig1cMCFZSEfgodZG4AMA&gclsrc=aw.ds
That thing looks wild. I may look into buying one of those.

And steel wool goes a long way to polish up the bracelet and remove any scratches.
Old tooth brush and a non-abrasive tooth gel, scrub up to a minute or two, then rinse with cold water and dry with a towel.

To touch up the scratches on a brushed stainless steel band of case, I use Scotch-Brite pad and brush lightly in one direction.
Thats an interesting tip for the scratches with the Scotch Brite pad.

How are the results?
1 - 2 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top